Preview

Herald of the Kazakh-British Technical University

Advanced search

Technical and chemistry properties of white portland cement

https://doi.org/10.55452/1998-6688-2022-19-3-33-44

Abstract

The white Portland cement WPC-1-500-D0 has been studied by us and consists of the following minerals, wt%: alite – 50.4; belite – 20.0; celite – 0.9; felite – 16.7; gypsum – 7.0. The four of one minerals are clinker, and the last is involved into the cement during its grinding.

Using X-ray phase analysis (XRP), it has been found that alite and belite have a crystalline structure, and felite has a glassy structure. Amorphism of felite is the result of high-temperature clinker has been cooled rapidly with water. The composition of clinker contains impurity of individual ions in form (Fe3+, Na+, K+, Mg2+, Ti4+, Mn2+, Cu2+), which are involved in the structure of clinker minerals; they do not create independent connections and do not remain in a free state. Moreover, Na+, K+, Mg2+, and possibly Ti4+, Mn2+ ions are mainly concentrated in the structure of silicate minerals, while Fe3+ and other chromophores in the consistance of calcium alumino-ferrites. Because of this, the values of interplanar distances (d) are shifted towards smaller and larger numbers than the reference ones. According by this situation, clinker minerals are their solid solutions. The physical and mechanical properties of white Portland cement WPC-1-500-D0 meet the technical requirements in accordance with GOST 965-89. “White Portland cement. Technical Specifications". However, due to the high content of felite (3CaO·Al2O3) – 16.7%, independent compounds of the 3CaO·Al2O3·6H2O type can be created, which will significantly reduce the durability of materials and products made on the basis of this white Portland cement. Therefore, it is strongly recommended to check all white Portland cements entering the Republic of Kazakhstan for changes in strength, frost-resistance and corrosion resistance.

About the Authors

D. S. Odintsov
Central Laboratory for Certification Testing of Building Materials
Kazakhstan

Odintsov Daniil Sergeevich, Laboratory-engineer, engineer of mechanical-test department 

95 Ryskulov St., 050000, Almaty



A. S. Suvorov
Central Laboratory for Certification Testing of Building Materials
Kazakhstan

Suvorov Aleksandr Sergeevich, Laboratory-engineer, engineer of X-Ray spectroscopy department 

95 Ryskulov St., 050000, Almaty



Z. A. Yestemesov
Central Laboratory for Certification Testing of Building Materials
Kazakhstan

Estemesov Zatkali Airanbaevich, Doctor of Technical Sciences, Professor, Headmaster 

95 Ryskulov St., 050000, Almaty



A. V. Barvinov
Central Laboratory for Certification Testing of Building Materials
Kazakhstan

Barvinov Andrei Vladimirovich, Candidate of Technical Sciences, Headmaster in Certification Department

95 Ryskulov St., 050000, Almaty



References

1. Korneev V.I., Zozulya P.V. (2010) Sukhie stroitel'nye smesi (sostav, svoistva), Moscow, OOO “RIF “Stroimaterialy”, 320 p.

2. GOST 965-89. Portlandtsementy belye. Tekhnicheskie usloviya.

3. GOST 125-2018. Vyazhushchie gipsovye. Tekhnicheskie usloviya.

4. Shayakhmetov G.Z., Soltambekov K.T., Estemesov Z.A. (2001) Sovremennye sukhie stroitel'nye smesi. Almaty, TselSIM, 325 p.

5. Duda V. Tsement (1981). Moscow, Stroiizdat, 464 p.

6. Cherepovskii S.S., Aleshina O.K. (1964) Proizvodstvo belogo i tsvetnogo portlandtsementa. Moscow, 127 p.

7. Izobretenie k patentu RU 2752767 S1. MPK S04V 7/42 (2006.01) i S04V 7/44 (2006.01). Sposob polucheniya klinkera belogo tsementa. D.A. Mishin, S.V. Kovalev.

8. Sanina K.E. (2017) Perspektivy ispol'zovaniya otkhodov pri proizvodstve belogo tsementa. Materialy Mezhdunarodnoi nauchno-tekhnicheskoi konferentsii molodykh uchenykh VGTU im. V.G. Shukhova. Belgorod, VGTU, pp. 40–45.

9. Posokhova M.V. (2015) Izuchenie vliyaniya vida i sostava dobavok na formirovanie faz pri obzhige klinkera belogo tsementa. Materialy Mezhdunarodnoi nauchno-tekhnicheskoi konferentsiii molodykh uchenykh VGTU im. V.G. Shukhova. Belgorod, VGTU, pp. 30–37.

10. Nabiullina L.K., Potapova E.N. (2009) Vliyanie razlichnykh dobavok na prochnost' belogo tsementa // Uspekhi v khimii i khimicheskoi tekhnologii, vol. 23, no 7/100, pp. 30–34.

11. Potapova E.N., Golubeva O.A. (2014) Dolgovechnost' izdelii iz belogo tsementa // Sukhie stroitel'nye smesi. Rossiya, no 4, pp. 18–22.

12. Zubekhin A.P., Yatsenko N.D., Golovanova S.P. (2014) Teoreticheskie osnovy belizny i okrashivaniya keramiki i portlandtsementa. Moscow, OOO “RIF “Stroimaterialy”, 152 p.

13. Gorshkov V.S., Timashev V.V., Savel'ev V.G. (1981) Metody fiziko-khimicheskogo analiza vyazhushchikh veshchestv. Moscow, Vysshaya shkola, 335 p.


Review

For citations:


Odintsov D.S., Suvorov A.S., Yestemesov Z.A., Barvinov A.V. Technical and chemistry properties of white portland cement. Herald of the Kazakh-British Technical University. 2022;19(3):33-44. (In Russ.) https://doi.org/10.55452/1998-6688-2022-19-3-33-44

Views: 398


Creative Commons License
This work is licensed under a Creative Commons Attribution 4.0 License.


ISSN 1998-6688 (Print)
ISSN 2959-8109 (Online)